Some people do actually try 100% infill and get decent results, so it really can go either way. You don’t usually want an infill above 80% since it means the heated nozzle is going to spend a lot of time emitting heat in the middle of the print, which can lead to printing issues. It really comes down to what model you are printing and your personal preferences for how much strength you want. What Infill Settings Should I Use For Miniatures?įor miniatures, some people suggest infill set to 50% as it helps in building strong prints, but you can go lower in many instances. You may want to have the Initial Layer Temperature a little hotter than the normal temperature, so the first layers have better adhesion to the build plate.Ĭheck out my article How to Get the Perfect Printing & Bed Temperature Settings. Build Plate/Bed Temperature (PETG): 60☌ to 80☌.Printing Temperature (PETG): 220☌ to 250☌.Build Plate/Bed Temperature (ABS): 80☌ to 110☌.Printing Temperature (ABS): 210☌ to 250☌.Build Plate/Bed Temperature (PLA): 30☌ to 50☌.Below are the best suitable temperatures for varying filaments types: PLA doesn’t really require any heated bed but if your 3D printer is equipped with one, its temperature should be set at 30☌ to 50☌. Printing & bed temperature settings may vary a bit depending on different 3D printing filaments.įor miniatures printing with PLA, the printing temperature should be around 190☌ to 210☌. What Printing & Bed Temperature Settings Should I Use For Miniatures? Make sure to keep your 3D printer on a stable and sturdy surface to contain any vibrations. Printing miniatures at 20mm/s to 40mm/s should bring the best results, depending on your 3D printer and setup. It’s definitely possible to get some good miniatures at a standard print speed of around 50mm/s but for optimal results you want to decrease it. Since there is a lot more precision and accuracy involved, having a lower print speed helps get that higher quality. Since miniatures are a lot smaller than normal 3D prints, we want to also translate that to reducing the print speed. What Print Speed Settings Should I Use For Miniatures? You can experiment with this and try reducing the line width to try get better details in your model as suggested by Cura. Line widths usually work good being the same diameter as the nozzle, which for this example is 0.4mm. What Line Width Should I Use for Miniatures? If you did want to try a higher resolution or a smaller layer height like 0.08mm, you’d need to change your nozzle to something like a 0.3mm nozzle. Initial Layer Height for Miniatures: X2 Layer Height (0.24 to 0.32mm).Best Layer Height for Miniatures (Cura): 0.12 to 0.16 mm.In a general, experts say that a layer height of 0.12mm would bring the best results but depending on the type of miniatures and required strength, you may go up to 0.12 & 0.16mm as well. The smaller the print’s layer height is, the higher quality your resultant miniatures will be. What Layer Height Should I Use for Miniatures? In the end, do all the post-processing which may include sanding, painting and other activities to make them smooth and look shiny.īest 3D Printer Settings for Miniatures (Cura)Īdjusting settings is necessary to achieve the point where the best quality miniatures can be printed efficiently.Ĭalibrating extruder, print speed, layer height, infill, and all other settings at the best suitable points are more than essential to get 3D prints of decent quality.īelow are settings for the 3D printer assuming a standard nozzle size of 0.4mm. Remove the print from the print bed and cut off all its supports either with pliers or simply breaking them with your hands.Now it’s time to print and wait as it may take some hours to get completed.Set values for infill, temperature, layer heights, cooling, extruder settings, print speed, and all other necessary settings. It is the most important part of any printing process. Now adjust the best suitable settings for the print in the slicer.It’s easy to do when you get the hang of it. You can also choose to create your own “Custom Support Structures” to manually add supports. If there are some overhangs in the print design, add automatic supports to the structure by enabling supports in Cura.It’s usually best to print miniatures at a 10-45° angle. Make sure that all parts of the print are within the boundary of the print bed. Adjust print scaling and orientation if necessary.Once it has been imported and is displayed on the print bed, move the cursor and zoom in to see the details of the print.Open Cura or any other chosen slicer and import the miniature design profile into the slicer.Start by creating or downloading the miniature design you want to print – Thingiverse or MyMiniFactory are great choices.Before we look into the best settings for 3D printed miniatures, let’s quickly go through the basic steps to 3D print a filament miniature.
0 Comments
Leave a Reply. |